🚨 LAST DAY SALE: DEALS EXPIRE IN 00:00:00
4.96 from 10K+ reviews
150,000+ customers
100% made in the USA
30-day money-back guarantee
Free Priority shipping on $49.99+
4.96 from 10K+ reviews
150,000+ customers
100% made in the USA
30-day money-back guarantee
Free Priority shipping on $49.99+

Can You Put Ceramic Spray Coating on Car Windows and a Windshield?

Short answer: It depends on the label, and with SFX1 the label says glass. SFX1 works on paint, glass, chrome, plastic and wheels. Get the spots off the glass first with Spotless X2, then mist SFX1 on, let it sit 1–2 minutes, and wipe it off. SFX1 is fine on the whole windshield, including the wiper path and the glass in front of the cameras and rain sensor.

We make SFX1 and Spotless X2. This isn’t a lab test, and we’re not claiming either one is #1. Other ceramic sprays have their own directions, so check yours.

For the spot-removal walkthrough, see hard water spot remover for car windows. For tinted glass, see water spot remover on tinted car windows. For a panoramic sunroof, see how to remove water spots from a panoramic sunroof. For side mirrors, see how to remove water spots from car side mirrors.

Why the answers online say “check the label”

Some ceramic sprays are made for paint only. SFX1 is made to coat every exterior surface: paint, glass, headlights, trim and wheels. One bottle does the whole car, glass included. SFX1 is fine on the whole windshield, including the wiper path and the glass in front of the cameras and rain sensor.

Step 1: Get the spots off first

A coating seals in whatever is under it. Hard water spots on glass need to come off before you coat.

  • Glass: Spotless X2. Put a quarter-sized amount on a microfiber pad, work it over a small section in a cross-hatch, then wipe with a damp towel, rinse and dry. No buffer. Heavy buildup can take 2–3 passes.
  • Tinted windows: use Spotless X2 on the untinted side only, including factory privacy glass. Never on tint film.
  • Keep Spotless X2 off paint. Paint spots get Dissolve X2.

Safety first: Spotless X2 is a strong acid cleaner. Its Safety Data Sheet lists severe skin burns and eye damage, so wear nitrile gloves and eye protection, and work with good airflow.

Step 2: Coat the glass with SFX1

  1. Start with clean, cool glass, out of direct sun.
  2. Shake the bottle and mist SFX1 onto the glass (or onto a microfiber).
  3. Let it sit 1–2 minutes.
  4. Wipe it off with a clean microfiber and buff until the glass looks clear and even.
  5. Wait 5 minutes, then do a second coat. Two coats are recommended; one is OK. See how many coats of ceramic spray you should apply.

Do the paint, headlights, trim and wheels while you’re at it. Same bottle.

What you get

  • Water beads, and new spots wipe off easier.
  • Lasts up to a year. Pro-grade spray ceramic, no buffer.
  • Car washes are fine. Any automatic wash, including brush and cloth tunnels.
  • Reapply when water stops beading. No fixed schedule.

How much you need

One 16 oz bottle covers 1 car 2–3 times, or 2 cars 1–2 times, depending on size.

$39.99 for 16 oz (regularly $79.98) · 540 reviews · made and shipped in the USA from Hawaii · 30-day money-back guarantee · free Priority shipping on orders $49.99+, $4.99 under.

SFX1 · 16 oz · $39.99 (regularly $79.98) · 540 reviews → Shop SFX1

Spotless X2 · 16 oz · $39.99 (regularly $79.98) · 1,240 reviews → Shop Spotless X2

FAQ

Can SFX1 go on car glass?

Yes. SFX1 works on paint, glass, chrome, plastic and wheels.

Is SFX1 fine on the whole windshield, including the wiper path and the cameras and rain sensor?

Yes. SFX1 is fine on the whole windshield, including the wiper path and the glass in front of the cameras and rain sensor.

Do I need to remove water spots before coating the glass?

Yes. Use Spotless X2 on glass first. A coating seals in what’s under it.

Can I use Spotless X2 on tinted windows before I coat them?

Yes, on the untinted side only, including factory privacy glass. Keep it off tint film.

How long does SFX1 sit before I wipe?

1–2 minutes. Then wipe it off with a clean microfiber.

How long should I wait between coats?

5 minutes. Let the first coat sit 1–2 minutes, wipe it off, wait 5 minutes, then apply the next coat.

How long does it last on glass?

Up to a year. Add a fresh layer when water stops beading.

Can I go through an automatic car wash afterward?

Yes. SFX1 is fine in any automatic wash, including brush and cloth tunnels.

Scroll to Top