Wipe on. Wipe off. Done right.
Step-by-step for every bottle, so you get pro results the first time. No machines, no detailer: a microfiber pad, a towel and a few minutes.
How to use Spotless X2
- Windshields
- Car windows
- Mirrors
- Shower doors
- Home windows
- Chrome
- Porcelain & tile
- 1Prep
Start with a clean, cool surface, out of direct sun. Test a small area first.
- 2Apply
Put a quarter-sized amount on a clean, dry microfiber applicator pad.
- 3Work it in
Rub it over a small section in a cross-hatch pattern with light pressure.
- 4Wipe & dry
Wipe off with a damp towel, rinse and dry. Heavy buildup can take 2–3 passes.
Pro tipOn very old buildup, let it sit a few seconds before you wipe. Own a polisher? Use it on medium speed with a white pad to go faster.
Not for paint or clear coat. Use Dissolve X2 on paint.
How to use Dissolve X2
- Paint & clear coat
- Wheels
- Chrome
- Plastic & rubber trim
- Boat gelcoat
- 1Wash first
Wash and rinse off loose dirt. Work on a cool panel in the shade.
- 2Apply
Put a small amount on a microfiber applicator or towel, not straight onto the paint.
- 3Work it in
Wipe it over one small section at a time with light pressure.
- 4Wipe & dry
Wipe clean with a damp microfiber, rinse and dry. A second pass handles stubborn spots.
Pro tipFollow up with SFX1 right away. Freshly cleaned paint is exactly when protection bonds best.
Don’t scrub dirty paint. Grit plus pressure is what scratches, so always wash first.
How to use SFX1
- Paint
- Glass
- Chrome
- Wheels
- Plastic trim
- 1Start clean
Use it on a clean surface, ideally right after Spotless X2 or Dissolve X2. Wet or dry is fine.
- 2Mist
Mist lightly onto one panel, or onto a microfiber towel.
- 3Spread
Spread it evenly over the panel with the towel.
- 4Buff
Buff to a gloss with a clean, dry microfiber. Instant wet-look shine.
Pro tipLasts up to 12 months, about 6 on average. Reapply when water stops beading up.
Got spots? Remove them first with Spotless X2 or Dissolve X2. SFX1 protects, it doesn’t remove.
Remove. Protect. Maintain.
- 1Wash
Start clean. Wash and rinse so you’re never rubbing grit into the surface.
- 2Remove
Spotless X2 on glass, Dissolve X2 on paint. Small sections, shade, light pressure.
- 3Protect
SFX1 on the clean surface so water beads off instead of drying into spots.
- 4Maintain
Dry after every wash, don’t let sprinkler water sit, and top up SFX1 when the beading fades.
- Work in the shade on a cool surface
- Use clean microfiber towels
- Test a small area first
- Work one small section at a time
- Protect right after cleaning
- Work on hot panels in direct sun
- Let product dry on the surface
- Scrub dirty paint (wash it first)
- Use Spotless X2 on paint
- Skip the label directions
The Ultimate Bundle: Spotless X2 + Dissolve X2 + SFX1, the whole routine. Ships free.
More questions? See the Water Spot Removal Guide or email the owners at support@sudfactory.com.