How to use

Wipe on. Wipe off. Done right.

Step-by-step for every bottle, so you get pro results the first time. No machines, no detailer: a microfiber pad, a towel and a few minutes.

Glass & chrome

How to use Spotless X2

1
Prep
Start with a clean, cool surface, out of direct sun. Test a small area first.
2
Apply
Put a quarter-sized amount on a clean, dry microfiber applicator pad.
3
Work it in
Rub it over a small section in a cross-hatch pattern with light pressure.
4
Wipe & dry
Wipe off with a damp towel, rinse and dry. Heavy buildup can take 2–3 passes.

Pro tipOn very old buildup, let it sit a few seconds before you wipe. Own a polisher? Use it on medium speed with a white pad to go faster.

Not for paint or clear coat. Use Dissolve X2 on paint.

Paint, wheels & trim

1
Wash first
Wash and rinse off loose dirt. Work on a cool panel in the shade.
2
Apply
Put a small amount on a microfiber applicator or towel, not straight onto the paint.
3
Work it in
Wipe it over one small section at a time with light pressure.
4
Wipe & dry
Wipe clean with a damp microfiber, rinse and dry. A second pass handles stubborn spots.

Pro tipFollow up with SFX1 right away. Freshly cleaned paint is exactly when protection bonds best.

Don’t scrub dirty paint. Grit plus pressure is what scratches, so always wash first.

Nano-ceramic protection

1
Start clean
Use it on a clean surface, ideally right after Spotless X2 or Dissolve X2. Wet or dry is fine.
2
Mist
Mist lightly onto one panel, or onto a microfiber towel.
3
Spread
Spread it evenly over the panel with the towel.
4
Buff
Buff to a gloss with a clean, dry microfiber. Instant wet-look shine.

Pro tipLasts up to 12 months, about 6 on average. Reapply when water stops beading up.

Got spots? Remove them first with Spotless X2 or Dissolve X2. SFX1 protects, it doesn’t remove.

The full routine

1Wash
Start clean. Wash and rinse so you’re never rubbing grit into the surface.
2Remove
Spotless X2 on glass, Dissolve X2 on paint. Small sections, shade, light pressure.
3Protect
SFX1 on the clean surface so water beads off instead of drying into spots.
4Maintain
Dry after every wash, don’t let sprinkler water sit, and top up SFX1 when the beading fades.

Don’t

Get all three in one box.

The Ultimate Bundle: Spotless X2 + Dissolve X2 + SFX1, the whole routine. Ships free.

More questions? See the Water Spot Removal Guide or email the owners at support@sudfactory.com.