Every Water Spot. Every Surface. The Exact Fix.
What causes water spots, which product removes which kind, how to use each one step by step, and which kit fits your situation. Everything we know, in one place.
Not sure? Get matched in 15 seconds
What are you fighting?
Pick the one that bugs you most.
How bad is it?
Be honest. It helps us get it right.
Keep them from coming back?
SFX1 nano-ceramic seals the surface so water beads off.
Your match
Know Your Spot
Water spots are minerals (mostly calcium and magnesium) left behind when hard water dries. How long they've sat there decides how hard they are to remove.
Fresh mineral film
Light white dots or a dull haze from sprinklers, rain or a car wash that dried in the sun. Sitting on top of the surface.
Fix: one pass with Spotless X2 (glass) or Dissolve X2 (paint).
Bonded deposits
Spots that survive a normal wash and a quick detailer. The minerals have built up in layers and bonded to the surface.
Fix: the remover plus a little dwell time and a second pass where needed.
Years of buildup
Crusty rings, cloudy shower glass, "frosted" windows. Thick layers of scale, sometimes with light etching underneath.
Fix: work in small sections; expect 2–3 applications. Then protect with SFX1 so it doesn't come back.
Being honest: if minerals have physically etched into the glass or clear coat (a pitted surface you can feel with a fingernail), no chemical can fully undo that. Our removers take off everything that's sitting on the surface, which is usually most of what you see.
Meet the Products
Three core bottles cover glass, paint and protection, and one pro coating is for enthusiasts. Always follow the directions on the label and test a small area first.
Spotless X2
The glass specialist. Dissolves hard water spots, mineral haze and red dirt film so glass goes clear again.
Use it on
- Windshields, car windows, mirrors
- Shower doors and home windows
- Chrome, metal, porcelain, tile
- Boat and RV glass
Best for
- Spots that regular glass cleaner can't touch
- Cloudy shower glass
- Sprinkler spots on windows
How to use
- Start with a clean, cool surface, out of direct sun.
- Put a quarter-sized amount on a damp microfiber or applicator pad.
- Work it in over a small section with light pressure.
- Wipe off, rinse with water, and dry. Repeat on heavy spots.
Pro tip: on very old buildup, let it sit for a few seconds before wiping. Some customers find a soft non-scratch scrubber helps on thick scale.
Dissolve X2
The paint specialist. Lifts water spots and mineral deposits off clear coat without a buffer or compound.
Use it on
- Car paint and clear coat
- Chrome and wheels
- Trim
- Boat and RV exteriors
Best for
- Spots left after washing in the sun
- Sprinkler and well-water spots on paint
- Dark cars that show every spot
How to use
- Wash and rinse first; work on a cool panel in the shade.
- Apply to a microfiber applicator, not straight onto the paint.
- Work one small section at a time with light pressure.
- Wipe clean, rinse and dry. A second pass handles stubborn spots.
Pro tip: follow up with SFX1. Freshly cleaned paint is exactly when protection bonds best.
SFX1 Nano-Ceramic
The shield. A spray-on nano-ceramic layer that adds gloss and makes water bead and roll off, so new spots have a harder time sticking.
Use it on
- Paint and glass
- Chrome, plastic trim and wheels
Best for
- Right after Spotless X2 or Dissolve X2
- Keeping a freshly cleaned car spot-free longer
- Quick gloss between washes
How to use
- Start with a clean, dry surface (ideally right after removing spots).
- Mist lightly onto one panel or a microfiber towel.
- Spread evenly, then buff to a gloss with a clean, dry microfiber.
- Reapply about every few months to keep the beading strong.
HybridCoat Graphene + Ceramic
A true DIY ceramic coating with graphene, for people who want long-term protection and deep gloss and don't mind a careful application.
Choose it if
- You enjoy detailing and want a real coating
- Your paint is already clean and decontaminated
Choose SFX1 instead if
- You want quick, spray-and-buff protection
- You'd rather reapply easily every few months
Coatings need preparation and careful application. Read the full instructions on the product page before you start.
Kits Compared
Every kit is cheaper than buying the bottles one by one, and every kit ships free.
| Glass Kit | Paint Kit | Paint & Glass | Ultimate | |
|---|---|---|---|---|
| Spotless X2 (glass) | ✓ | – | ✓ | ✓ |
| Dissolve X2 (paint) | – | ✓ | ✓ | ✓ |
| SFX1 (protection) | ✓ | ✓ | – | ✓ |
| Price | $59.99 | $59.99 | $59.99 | $74.99 |
| Bought separately | ||||
| Best for | Glass you want to keep clear | Paint you want to keep glossy | Removing spots everywhere | The whole job, done once |
| View | View | View | View the Ultimate |
Recommendations by Situation
Sprinkler spots on the daily driver
Fresh to stubborn spots on glass and paint from sprinklers or washing in the sun.
Get: Paint & Glass Bundle, or the Ultimate to keep them off.Black or dark car
Every spot shows. You want them gone and you want the gloss to pop.
Get: Paint Kit (Dissolve X2 + SFX1).Cloudy shower door
Hard water scale and soap film that make clear glass look frosted.
Get: Spotless X2. Two bottles for a whole house.Boat or RV
Big surfaces, lots of glass and plenty of hard water and sun.
Get: Ultimate Bundle to cover glass, exterior and protection.Detailers & fleets
Multiple vehicles, repeat jobs, and you need it to work every time.
Ask us: wholesale & fleet pricing.Remove. Protect. Maintain.
Wash
Start clean. Grit plus pressure is what scratches, so wash and rinse first.
Remove
Spotless X2 on glass, Dissolve X2 on paint. Small sections, shade, light pressure.
Protect
SFX1 on the clean surface so water beads off instead of drying into spots.
Maintain
Dry after every wash, avoid letting sprinkler water sit, and top up SFX1 every few months.
Do's & Don'ts
Do
- Work in the shade on a cool surface
- Use clean microfiber towels
- Test a small area first
- Work one small section at a time
- Rinse and dry after removing spots
- Protect right after cleaning
Don't
- Work on hot panels in direct sun
- Let product dry on the surface
- Use steel wool or abrasive pads on glass or paint
- Scrub dirty paint (wash it first)
- Expect etched pits to disappear completely
- Skip the label directions
FAQ
Can I use Spotless X2 on paint?
Use Dissolve X2 on paint; it's made for clear coat. Spotless X2 is made for glass and hard surfaces like chrome, porcelain and tile.
Do I need a buffer or machine?
No. Both removers work by hand with a microfiber applicator. The chemistry dissolves the minerals, so you don't have to grind them off.
How many applications will I need?
Fresh spots usually come off in one pass. Years of buildup can take 2–3 applications, and customers mention that in their reviews too. Work in small sections.
Will it remove etching?
It removes the mineral deposits sitting on the surface. If minerals have physically etched into glass or clear coat, that damage can't be fully reversed with a chemical. It usually looks dramatically better, though.
Does SFX1 replace wax?
SFX1 is a spray-on nano-ceramic protectant that adds gloss and water beading. For long-term, enthusiast-level protection, see HybridCoat.
Which kit should I get?
Glass only: Glass Kit. Paint only: Paint Kit. Both, removal only: Paint & Glass Bundle. Everything plus protection: the Ultimate Bundle. Not sure? Take the 15-second quiz at the top of this page.
How fast does it ship?
Orders ship every day, weekends included, and arrive in 1–3 business days. Priority shipping is free on orders $50+ and on every kit.
Still Deciding?
Answer three quick questions and we'll match you with the exact product. Or grab the system most customers start with.
Order in --:--:-- · ships within 1 business day